How to replace the Battery Pack (APCRBC152) of APC Smart-UPS SRT 3000VA
At the beginning, powered off the APC Smart-UPS SRT 3000VA (UPS), then installed a new Battery Pack.
Umm...
Got a reference from the Schneider Electric.
Then, solved the question.
Why did not work at the start? It was because the battery module is hot-swappable, not needing to disconnect the load, or power down the UPS.
1.
PowerChute Business Edition has detected the following event:
On Battery
2.
PowerChute Business Edition has detected the following event:
Communication Lost While On Battery
3.
PowerChute Business Edition has detected the following event:
Battery Disconnected
4.
PowerChute Business Edition has detected the following event:
Battery Reconnected
5.
PowerChute Business Edition has detected the following event:
Self Test Initiated
6.
PowerChute Business Edition has detected the following event:
Self Test Passed
PowerChute Business Edition has detected the following event:
On Battery
2.
PowerChute Business Edition has detected the following event:
Communication Lost While On Battery
3.
PowerChute Business Edition has detected the following event:
Battery Disconnected
4.
PowerChute Business Edition has detected the following event:
Battery Reconnected
5.
PowerChute Business Edition has detected the following event:
Self Test Initiated
6.
PowerChute Business Edition has detected the following event:
Self Test Passed
References
Update